Home All Categories Contact Us Affiliate Account 0 Cart 0 Checkout 

Caribe Back in stock 25.00 ea 10/200.00, Armatus Payara back is Stock.

Navigation
Live Arrival Guarantee
River Monsters

Categories
All Categories 
All
Catfish
Cichlids
Discus
Hawaii Fish Ban Petetion
Invertebrates
Plants
Plecos
Piranhas
Stingrays
Oddballs

Dry Goods
Backgrounds
Books and Dvds
Water Conditioners

Latest Stock Updates
1. L-330 Spotted Royal 5" (Watermellon Pleco)
2. Red Belly Piranha 4"-5" (Pygocentrus Nattereri)
3. Caribe Piranha 1.5" (pygocentrus notatus)
4. Hydrolycus Armatus 2.5"-3"
5. Blackwater Extract 3.38 fl.oz
6. Saber Tooth Payara 4" (Hydrolycus scomberoides)
7. Ruby Red Oscar 3"-4" (Astronotus ocellatus)
8. Platinum Oscar 2" (Astronotus ocellatus)
9. Lemon Oscar 3" (Astronotus ocellatus)
10. Arapaima Gigas 5"-6" (Arapaima Gigas)
11. Peacock Bass 3"-4" (Cichla Moloculus)
12. Exodons 2"-3" (Exodon paradoxus)
13. Electric Blue Ram 2.5"-3" (New Color)
14. Chinese Sailfin Shark 6" (Myxocyprinus asiaticus)
15. Wolf Fish 4" (Hoplias Malabaricus)


Your IP Address
For security, your IP address is recorded as:
38.107.179.210

Display
Language
Currency
Rates as of 20081231


Aqua Terra Malawi Rock 48X24 (zAD Malawi 48x24)

Aqua Terra Malawi Rock 48X24

Installing Background

- Measure the inside length of your tank or enclosure.

- Cut the background 1/4" shorter then the length you measured. This allows 1/8" gap on both sides to apply silicone.

- Diagonally trim 1/2" off the bottom corners of the background so that the siliconed edges of the tank does not interfere with the background sitting flat on the bottom of the tank. (This is not necessary if you have an acrylic tank.)

- Place the background in the tank and using a felt tip marker, outline the bottom of the background.

- This line will be used as a guideline to apply silicone.

- Apply silicone following the inside of the line.

- Now carefully lower the background into place.

- Match the bottom edge of the background with the outline of silicone and press firmly into place.

- Run silicone along the sides, filling in the 1/8" gap.

- Let silicone dry for 24 hours before filling the tank.

- When filling the tank, alternate filling the front and back of the background. This is done to even out the water pressure on the two sides of the background.

Cutting and Rejoining Background

- The background can be easily cut with any utility knife or razor blade. Simply cut into the background approximately half the thickness of the background.

- Next, place the background along the edge of a table and press down along the cut that you just made.

- The background will snap clean in half, leaving you with perfectly matching edges.

- To join the two pieces back together, apply a bead of silicone along the cut edge and match the two pieces together.

- The two pieces match seamlessly!

- Remember to allow 24 hours for the silicone to dry.

Drilling Holes in Background

- Using a drill and holesaw, drill hole in desired location.

- Apply a ring of silicone along the back of the hole.

- Place plastic wire mesh over the hole and let dry.

- Water will flow to the back of the background through this hole acting as an overflow and surface skimmer.

- The plactic screen will also prevent fish from getting behind the background.

 



Product Reviews :
Write a review

Miscellaneous :
Email a Friend
Product Inquiry
    
Ready To Order?

Our Price: $0.00

Item in stock!

Free shipping for this item!

 




Related Products :

Promotions2

| Live Arrival Guarantee |
Copyright 2001 - 2012  AquaScapeOnline Powered By: CandyPress   
Page displayed in: 1.0469 seconds.